Magnadyne M1-LCD - Manual (Page 13)

13
Radio Operation
Power On/Off:
Press the button to turn the unit 0n.
Selecting the Radio Source:
Touch the HOME button to activate the source
selection screen. Touch the RADIO button to
enter the radio operation screen.
Home Button
Selecting the AM or FM Band:
Press the BAND button repeatedly and select
from AM1, AM2, FM1, FM2 or FM3.
Band Indicator
Manually Tuning in a Radio Station:
Press and hold either the l ᮤᮤ or ᮣᮣ l button until
“MANUAL” appears in the display, then release.
Then press the l ᮤᮤ or ᮣᮣ l button until the desired
radio station appears in the display.
Note: The unit will automatically switch from FM
Mono to FM Stereo when the signal strength
increases to a stereo level. If the stereo signal
should become weak, the unit will switch back to
Mono. FM stereo reception is indicated when the
“ST” appears in the display.
Lower
Frequency
Higher
Frequency
Tuning in a Radio Station Using Seek:
Press either the l ᮤᮤ or ᮣᮣ l button and the tuner
will scan to the next strong station, then it will
stop seeking and start playing.
Lower
Frequency
Higher
Frequency
M1-LCD-UM Rev. B (RGB):9900CD Manual 9/3/08 10:41 AM Page 13