Updating driver, Removing driver – Moxa Technologies C104H/PCI Series User Manual
Page 26
3-12
Smartio C104H/PCI Series User’s Manual
Smartio/Industio Configuration Panel dialog box.
Updating Driver
To update the driver for the Smartio C104H/PCI Series board, simply follow the
following procedures.
1.
Open [Control Panel], click [Network] icon, and select [Adapters] tab.
2.
Click on MOXA Smartio/Industio Family Adapter in the Network Adapter
list.
3.
Click [Remove] button in Network dialog box.
4.
Click [Close] button in Network dialog box.
5.
Restart the system.
6.
Please refer to Step 1 to 21 in “First Time Installing Driver” of “Windows
NT” section to install the new driver.
Removing Driver
To remove the driver for the Smartio C104H/PCI Series board,
1.
Open [Control Panel], click [Network] icon, and select [Adapters] tab.
2.
Click on MOXA Smartio/Industio Family Adapter in the Network Adapter
list.
3.
Click [Remove] button in Network dialog box.