Connecting the fan-out cable – Moxa Technologies C104H/PCI Series User Manual
Page 14
2-2
Smartio C104H/PCI Series User’s Manual
Connecting the Fan-out Cable
Step 7:
Connect the connection cable.
P1 P2
P3 P4
Smartio C104H/PCI Series
Step 8:
Power on the PC and the BIOS will automatically set the IRQ and I/O
address.
Note!
Each board must occupy one unique IRQ and four 8-byte I/O
addresses, which are assigned automatically by the PCI BIOS.
However, you can select a free IRQ number manually via the
PC’s BIOS setup for the PCI slot, but normally this method is not
available for the I/O address. The possible IRQ numbers are 2, 3,
4, 5, 7, 10, 11, 12, and 15. The possible I/O addresses are from
0x0000 to 0xFFFF.
Step 9:
Proceed with the software installation detailed in the next chapter,
“Software Installation”.