Marantz DV4300 - Manual (Page 45)

ENGLISH
41
No audio,or audio is distorted.
• Some DVD discs do not output digital audio.
Switch your amplifier to the player’s analog outputs.
• Dirt,dust,etc.on the disc.
Clean the disc (page 37 ).
• Interconnects are not fully inserted into the terminals
(or are not connected).
Check that all interconnects are firmly inserted.
• Dirty or oxidized plugs/terminals.
Clean the plugs/terminals.
• Incorrect audio cable connection.
Check the audio connections (page 7 ).
• Player’s output is connected to the amplifier’s phono
(turntable) inputs.
Connect to any set of inputs except phono.
• The disc is paused.
Press (play) to exit the pause mode.
• Incorrect amplifier settings.
Check that the volume is turned up,that the speakers are
on, the input function set correctly,etc.
The analog audio is OK,but there appears to be no digital
audio signal.
• Incorrect Audio menu settings.
Make sure that the Digital Out setting is set to
BITSTREAM or PCM (page 32).
Check that the BITSTREAM and PCM settings are
suitable for your amplifier —check the amp’s instruction
manual.
Noticeable difference in DVD and CD volume.
• DVDs and CDs use different recording methods.
This is not a malfunction.
No DTS audio output.
• If this unit is connected to a non-DTS compaible amplifier
or decoder using a digital audio cable, please connect to a
DTS compatible amplifire or decorder. If you do not do
this,noise will be output if you try and play a DTS disc.
• If this unit is connected to a DTS-compatible amplifier or
decoder using a digital audio cable,check the amplifier
settings,and that the cable is properly connected.
The disc containing the MP3 tracks won ’t play.
• If the disc is a recordable CD,make sure that the disc is
finalized.
Check that the track(s)are in the MPEG1 Audio Layer 3
format.
Check that the sampling rate of the track(s)are 32 or 44.1
or 48kHz.
Some MP3 tracks appear to be missing from a disc.
• If a track name does not end in “.mp3 ”or “.MP3 ”,this
player will not recognize it as an MP3 track.
• This player only recognizes the first 126 folders and 255
tracks on a disc.If there are more folders/tracks than this,
you will not be able to play them.
Note
Static electricity or other external influences may cause
malfunctioning of this unit. In this case, unplug the power cord
and then plug back in. This will usually reset the unit for proper
operation. If this does not correct the problem, please consult
your nearest MARANTZ service center.