Miele PW 6065 - Manual (Page 42)

Changing the light bulb
The machine will not operate if the light
bulb is burnt out.
^ Disconnect the power supply to the
work area by unplugging the unit,
tripping the circuit breaker or
removing the fuse.
^ Open the detergent dispenser
drawer. Remove the tool from the rear
side of the panel.
^ Open the drum door.
^ Insert the tool into the slit of the light
bulb, turn counterclockwise until
resistance is felt.
^ Pull out the drum lighting.
^ Press together the hooks of the
plastic fitting, 2 , to separate it from
the bulb, 1 .
^ Replace the bad light bulb with a
new one.
A replacement bulb can be obtained by
contacting Miele.
The light bulb must not exceed the
maximum wattage listed on the data
plate.
^ Insert the light bulb into the plastic
fitting.
^ Insert the drum lighting in the socket
and turn clockwise.
To use the washer it is absolutely
necessary to have the light bulb
properly installed.
Frequently asked questions
42