Step select water level, Step select water temperature, Step start washer – Maytag W10117754A User Manual
Page 5: Step, Select extra rinse
Turn the WATER LEVEL knob
to the setting that matches the
size of the load.
Select models offer infinite set-
tings. Choose a specific setting or
any point in between.
If more water is needed once the
fill is complete, turn the knob to
reset and then to the proper set-
ting.
Super
Large
Medium
Mini
3/4 – Full
1/2 – 3/4 Full
1/3 – 1/2 Full
1/4 Full
REMEMBER: Items must circulate freely for best
results.
WATER LEVEL SETTING
LOAD SIZE
4
Step
Select Water Level
(Features may vary according to model.)
Turn the WASH/RINSE knob to
the desired water temperatures.
Follow the garment care label for
best results. Use the chart at right
as a guide.
2
2
Step
Select Water Temperature
3
3
White and heavily
soiled, color-fast
items
Delicate items
Moderately soiled,
colored items; most
Easy Care/Permanent
Press items
Brightly colored,
lightly soiled items;
washable woolens
WASH/RINSE TEMPS
LOAD TYPE
Hot/Cold
Warm/Warm
(select models)
Warm/Cold
Cold/Cold
Step
Start Washer
5
5
• Add detergent and any additives.
• Add load and close lid.
• Pull the control dial out to start.
Step
4
4
Provides additional rinse at the end of
the cycle to more completely remove
laundry additives, suds,
perfumes, etc.
OPTION
USE
Extra Rinse
(select models)
REMEMBER: In wash water temperatures below 65° F, detergents do not dissolve well or clean well. Care labels define cold
water as up to 85° F.
Select Extra Rinse
(if desired) (select models)