Metra Electronics MAZDA CX7 2007-09 99-7508 - Manual (Page 7)

99-7508 KIT ASSEMBLY
5
DOUBLE DIN OR
STACKED ISO MOUNT UNITS PROVISION
Cut and remove the center bar from
the Radio Housing. (Figure A) 1
Snap the Double DIN brackets to the
inside edge of the Radio Housing.
(Figure B) 2
Slide the Double DIN or stacked ISO
mount units into the bracket/radio
housing assembly then secure it to
the assembly using the screws sup-
plied with the Double DIN or ISO
mount units. (Figure C) 3
Snap the Double DIN Trim plate onto
the front of the Radio Housing.
(Figure C) 4
Continue to final assembly.
* Note: Refer also to the instructions included with the aftermarket radio.
A
B
C