Metz Mecablitz 36 AF-3N - Manual (Page 31)

140
Dedicated functions and flash mode
Funzioni dedicate e modi flash
Funciones dedicadas y funcionamiento del flash
5.8 Establishing the maximum flash range with the
aperture calculator
The maximum flash range of the mecablitz can be estab-
lished by way of the aperture calculator in the control panel.
• Set the “ISO” upper slide at the ISO speed of the film load-
ed in the camera.
• Set the lower slide at the selected zoom position of the
reflector (28 mm, 35 mm, 50 mm or 85 mm).
• Select in the “F” line of the aperture calculator the f-stop set
on the camera/lens.
• The maximum flash range of the mecablitz in meters (m)
and feet (ft) is indicated underneath the f-stop.
A minimum distance to the subject should be maintained to
avoid overexposure. The minimum distance is approximately
10 per cent of the maximum flash range.
Ideally, the subject should be located in the middle third of
the distance between minimum distance and maximum flash
702 47 0059.A1 D,F,NL,GB,I,E 24.07.2002 8:42 Uhr Seite 140