Miele CVA 4070 - Manual (Page 33)

The flavor of the coffee depends on the
coffee and quantity of water used. To
ensure the machine uses exactly the
amount of water to suit your taste and
your cups, there is a choice of two
serving sizes for espresso/coffee. The
fill height can be programmed.
Espresso serving size
approx. 30 - 125 ml.
Coffee serving size
approx. 30 - 250 ml.
Hot water serving size
approx. 30 - 250 ml.
^ Set the desired cup size under the
coffee dispenser.
^ Select the drink you would like to
program. Press and hold the touch
control until "Serving setting" is
displayed under the drink type.
^ Release the touch control.
^ Select "OK" once the cup is filled to
your desire.
Cappuccino is a combination of milk
froth and espresso. When preparing
milk froth the froth-time can be
individually set. The amount of
espresso can be set to approx.
30 - 125 ml.
^ Set the desired cup size under the
froth dispenser first.
^ To set the amount of froth, press and
hold "Cappuccino" until the display
shows "Serving setting".
^ Select "OK" once steam and froth are
dispensed to your desire. The froth
time has been set.
^ You will then be prompted to move
the coffee cup from under the froth
dispenser to the coffee dispenser.
^ Press and hold "OK" until the display
shows "Serving setting".
^ Release the touch control.
^ Select "OK" once the cup is filled to
your desire.
The programmed amount will be dispensed every time the drink is made.
The water flow stops automatically when it reaches the maximum amount
possible. The maximum filling quantity will then be saved for the drink.
Setting the serving sizes
33