Miele CVA 4070 - Manual (Page 26)

Steam system
The appliance has two heating
systems. They allow for independent
preparation of froth/cappuccino or
espresso/coffee. The second heating
system can be turned off to save
energy during the heating phase e.g. if
froth is not prepared very often.
When the steam system is turned off
and froth or cappuccino is selected,
the unit must heat up first to produce
steam.
As long as the coffee system was
not completely turned off, the steam
system is on.
The steam system is turned on by
default.
To turn the steam system off
^ Select "Settings".
^ Select "Steam system".
The second line shows if the steam
system is turned on or off.
^ Select "On" or "Off" and then "OK" to
save the setting.
Lighting
Lighting sets the type of light used
when the appliance is turned on. The
lighting can be turned on/off
automatically or dimmed to the desired
brightness. The dimming functions can
be set independently for the upper or
lower lighting.
,
Caution! Do not look directly or
with an optical instrument into the
lighting. Laser!
To change the lighting
^ Select "Settings" and then "more".
^ Select "Lighting".
^ Select "On during use" or "Dimming".
On during use
On: The lighting turns on and off when
the unit is turned on and off.
Off: The lighting stays turned off.
Dimming
The brightness of the upper and lower
lighting can be set independently of
each other.
^ Select "Top" or "Bottom".
^ Set the brightness by selecting the
center touch control to the left or
right.
^ Select "OK" to save the selection.
^ Select "Clear" to get back to
"Settings".
Settings
26