Philips Magnavox 701P41586 - Manual (Page 12)

4 Chapter 1 Installing Plotter Driver
4
Optional functions unique to the printer model can be set by clicking
[Options...] button.
These settings can be changed later by selecting [Device and Default
Selection] from the “Print/Plot Configuration” dialog box.
5
Setting items
Select paper type: Select type of paper to be used from Bond, Film, or Vellum
paper.
Paper size: Select paper size. For this driver, paper size must be selected here,
not at Paper Size and Orientation in the “Print/Plot Configuration” dialog box.
Length: When “Custom size” is selected at “Paper Size”, its length can be set
in integral value in 1mm increments.
Set margin: Set a margin in the range of 0 to 10mm on each side of paper.
This margin reduces the maximum plotting area.
Fill: Set solid or halftone (dither) pattern for filling graphics or TrueType fonts
Select resolution: Select resolution for raster (picture image) output.
Image correction: Click here to open the sub-dialog for raster (picture image)
gamma correction.
Version: Version of this driver.
Red print: Not supported by this model.
Red-specified pen number: Not supported by this model.
Number of Copies: Specify the number of copies (1 to 99).
Select generated data: Select a plotter language (RTL/GL2/VCGL+MMR) to
generate the data. ‘VCGL+MMR’ is not supported by some of the plotter
models.
Options: Click the ‘Options…’ button to open the sub-dialog to set optional
functions unique to the selected plotter model.