Metrologic Instruments MS3580 - Manual (Page 20)

16
S CANNER O PERATION
Configurable Button Functions
S ECONDARY S CAN P ATTERN
B UTTON H OLD M ODE WITH C ODE G ATE E NABLED
For illustration purposes the unit’s* primary scan pattern has been set to
all scan lines (omnidirectional reading) and the secondary pattern has
been set to single-line (menu reading) with a 5 second button click
timeout configured.
1. The primary scan pattern is active when the
scanner starts.
2. To activate the secondary scan pattern,
press and hold the button.
3. To scan the bar code, align the laser line
over the bar code while continuing to hold
down the button.
4. To transmit the bar code, release the
button. The scanner will beep once.