MSI US54G - Manual (Page 27)

22
In the Status tab, you can configure more network settings.
Channel
Specifies the operating radio frequency channel in Ad-hoc
mode, which should be set to the same channel as the other
points in the wireless network.
Speed
This field sets the current transmitting rate. The speed
should be set to Auto rate to optimize performance and
range, which will adjust the transfer speed for best perfor-
mance and longest range automatically.
Radio
Set to On to activate the radio.
SSID
Means Service Set Identifier, a unique name shared among
all points in a wireless network. It must be identical for all
points in the network. Then the card will be able to
connect to an access point with the same SSID.
Click Advance, and you can get more information about the LAN
traffic status and more detailed settings.
Signal Strength:
shows the received signal
strength level.
Link Quality:
shows the measured signal
level and connection status.
>>> 4.3 Status