beautypg.com

Temperature control, Features of your iron dry ironing, Spray – Morphy Richards SEMI-ELECTRONIC IRON RN40692 User Manual

Page 5: Variable steam, Shot of steam

background image

Temperature

control

B

Default setting + 3 dot (cotton).

To increase the temperature,

press the arrow .

To decrease the temperature,

press the arrow .

The temperature console · will

flash to indicate that the iron

has not yet reached the correct

temperature.

Once the correct temperature

has been reached, the light will

stop flashing and there will be

one ‘beep’ to signal that the iron

is now ready for use.

FEATURES OF YOUR

IRON
Dry ironing

You can use your iron as a dry

iron only. Make sure the variable

steam control ‹ is set to the ‘0’

symbol.

Any temperature setting may be

used depending on the

garment. The spray feature may

be used, providing there is

water in the tank (see filling

section). You do not need to put

any water in the tank when dry

ironing only.

Spray

C

Press the spray button ¤ and

aim the spray of water at

stubborn creases. You can do

this whilst dry ironing, providing

there is water in the tank. When

using the water spray, it may be

necessary to push the button a

few times to get the spray pump

primed.

Variable steam

D

Fill the iron with water,

as described in ‘Filling’

on page 4, and insert

the plug into the

electrical socket.

The steam output can be varied

from low to high by moving the

variable steam control D.

The steam facility should only

be used on garments which are

suitable for ironing at the 3 dot

and MAX setting.

Shot of steam

E

Press the shot of steam

button ⁄ to obtain a

burst of extra steam for

ironing out creases in

heavy material such as

denim etc.

The shot of steam can be used

whilst dry ironing, providing

there is water in the tank, and

the temperature control is set

within the steam range.

Do not use the shot of

steam at temperatures

below the steam range

shown on the control

dial.

Note: For optimum

steam quality, do not

operate the shot more

than three times in

succession.

B

Increase
temperature

Decrease
temperature

C

Steam off

‘MAX’ steam

D

5

E

For details of other Morphy Richards products, please see our website:

RN40692MUK Rev3:RN40692 MUK Rev 3 01/12/2009 11:52 Page 5