Multi-Tech Systems MT5634ZBA - Manual (Page 40)

Chapter 4 - AT Commands, S-Registers, Result Codes
40
MultiModemDID User Guide
100 CONNECT 28000 * Connected at 28000 bps, 56K rate
101 CONNECT 29333 * Connected at 29333 bps, 56K rate
102 CONNECT 30666 * Connected at 30666 bps, 56K rate
103 CONNECT 33333 * Connected at 33333 bps, 56K rate
104 CONNECT 34666 * Connected at 34666 bps, 56K rate
105 CONNECT 37333 * Connected at 37333 bps, 56K rate
106 CONNECT 38666 * Connected at 38666 bps, 56K rate
107 CONNECT 41333 * Connected at 41333 bps, 56K rate
108 CONNECT 42666 * Connected at 42666 bps, 56K rate
109 CONNECT 45333 * Connected at 45333 bps, 56K rate
110 CONNECT 46666 * Connected at 46666 bps, 56K rate
111 CONNECT 49333 * Connected at 49333 bps, 56K rate
112 CONNECT 50666 * Connected at 50666 bps, 56K rate
113 CONNECT 53333 * Connected at 53333 bps, 56K rate
114 CONNECT 54666 * Connected at 54666 bps, 56K rate
115 CONNECT 25333 * Connected at 25333 bps, 56K rate
116 CONNECT 26666 * Connected at 26666 bps, 56K rate
* When the extended result code configuration option is enabled, one of the following codes is append-
ed to the result code, depending on the type of error control connection:
V42bis – V.42 error control (LAP-M) and V.42bis data compression
V42 – V.42 error control (LAP-M) only
MNP5 – MNP 4 error control and MNP 5 data compression
MNP4 – MNP 4 error control only
NoEC – No error control protocol