Minolta Dimage 7i - Manual (Page 146)

DISCONNECTING THE CAMERA FROM THE COMPUTER
146
WINDOWS ME, 2000 PROFESSIONAL, AND XP
Confirm that the access lamp is not lit. Turn the mode dial to another position and then disconnect
the USB cable.
Never disconnect the camera when the access lamp is lit – the data or
CompactFlash card may permanently be damaged.
To disconnect the camera, click once on the unplug-or-eject-hardware icon located on
the task bar. A small window will open indicating the device to be stopped.
WINDOWS 98 / 98 SECOND EDITION
Click on the small window to
stop the device. The safe-to
remove-hardware window will
appear
; close the window.
Turn the mode dial to another
position and then disconnect the
USB cable.
DATA-TRANSFER MODE
When more than one external device is connected to the computer, repeat the procedure above
except right click on the unplug-or-eject-hardware icon. This will open the unplug-or-eject-hardware
window after clicking on the small window indicating the device.