Motorola CPEI 150 - Manual (Page 10)

68P09291A19-C 2-3
APR 2009
Installation 2
Before You Begin Configuration
Some settings on your computer must be verified or changed to ensure that your
computer configuration can support the Desktop CPE.
• Call your service provider to confirm that your service provider has registered your
unit.
• Verify that the IP address and DNS settings are automatically generated in your
Local Area connection of your Internet Protocol (TCP/IP) properties. Refer to the
chapter titled “Configuring TCP/IP” for information on how to do this.
• Ensure you know which protocol you will need to enter in the Setup Wizard
procedure. This will either be EAP-TLS or EAP-TTLS. If EAP-TTLS is to be used,
your service provider will provide you a Username and Password.
User Interface Overview
A web based Graphical User Interface (GUI) is used to configure the features of the CPE.
Figure 2-1: Main Menu Sample