MITSUBISHI ELECTRIC P93DE - Manual (Page 26)

18
Cause/Error display
Cause/Error display
[Symptom]
• When the door opens, an alarm tone is heard.
The indicator displays " " for one second.
In this case, all the buttons and switches become invalid.
• If this error occurs while more than one copy is being printed,
printing is cancelled at the occurrence of the error.
Symptom/Remedy
Symptom/Remedy
[Remedy]
Close the door.
When the door is closed while the printing of more than one copy is
being printed, an alarm tone is heard.
After the error is resolved, the unit resumes printing from the
interrupted image and finishes printing all the outstanding images.
[Symptom]
• When the thermal head does not automatically go down at the start
of printing or paper feeding, an alarm tone is heard.
• When the thermal head does not automatically go up at the end of
printing or paper feeding, an alarm tone is heard.
The indicator displays "
" and all the buttons become invalid.
• If this error occurs while more than one copy is being printed or
there are images waiting to be processed, printing is cancelled at
the occurrence of the error.
[Remedy]
Turn the power off. Then turn it on again.
Printing of the interrupted image or all the images saved in the
memory that are waiting to be processed is cancelled.
5 5 5 5 5
Gear lock error
4 4 4 4 4
Door error