Maxon Telecom UM-SL55 - Manual (Page 15)

OTHER SCANNING FEATURES
• Look Back: Any channel, when not in the scan mode, can
be programmed to “look back” at the “Priority” channel.
This feature is ideal for those who do not need scan as
defined above, but want to make sure that they never miss
a call on the “Priority” channel, if another channel has
been selected. Once a “look back” channel has been
selected, the radio will periodically “look back” at the
“Priority” channel. If activity is detected on the “Priority”
channel, the radio will move to that channel for as long as
it remains active.
• Scan Channel Delete: To temporarily delete a channel
from the scan list, simply press the monitor button while
stopped on the channel to be deleted, during the scanning
routine. This will remove that channel from the scan list
until the channel is changed or the radio’s power is reset.
When the power is restored or the scan list channel
position is selected, the original Dealer programmed scan
list will be activated.
• CTCSS / DCS Scanning: The SL55+ can be programmed
by your Dealer to scan for tone. This will help block out
unwanted calls.
• Normal Scan TX: Allows a transmission only after a call is
received, depending on the programmed scan delay time.
After the scan resumes, and a transmission is made, the
radio will sound an alarm (two beeps) and will not allow a
transmission.
• Priority Scan TX: Allows a transmission after a call is
received depending on programming scan delay time.
The transmission will be made on the channel that the call
was received. After the scan resumes, if a transmission is
made, the radio will transmit on the programmed “priority”
channel.
• Priority Only TX: Allows a transmission on the “priority”
channel when scanning and not stopped on an active
channel. It can also be programmed to always transmit on
the “priority” channel if scanning or stopped on an active
channel.
• Receive Only Scan: This only allows reception. If a
transmission is attempted at any time, the radio will sound
an alarm (two beeps) and will not allow the transmission.
ENGLISH
13