Philips Magnavox 42MF438B - Manual (Page 11)

EN-10
FRANÇAISE
ESP
AÑOL
ENGLISH
Use your TV 4.
This section helps you perform basic TV operations.
Switch your TV on/off or to standby 4.1
To switch the TV on
Press • . POWER at the right side of the TV.
POWER
CHANNEL
To switch to standby
Press • . on the remote control.
To switch on from standby without the remote control
Press • . POWER at the right side of the TV to switch the TV off.
Press • . POWER again to switch the TV on.
To switch off
Press • . POWER at the right side of the TV.
Note D
Energy consumption contributes to air and water pollution. When the
power cord is plugged in, your TV consumes energy. Your TV has a very
low standby power consumption.
Watch TV 4.2
Switch channels
Press a number (1 to 999) or press 1. CH+ or CH- on your remote
control.
For digital channels, press a number (1 to 999) followed by a dot
"." and then the corresponding sub channel number (1 to 999). Ex.
108.30.
Press 2. PREV CH to return to the previously viewed TV channel.
Note D
You can also switch channels by pressing CHANNEL - or + on the
side controls of the TV.
Adjust volume
Press 1. VOL+ or VOL- on your remote control.
Press 2. MUTE on your remote control to mute the sound.
Press MUTE again or press VOLUME - or + to restore the sound.
Note: D You can also adjust the volume by pressing VOLUME - or +
on the side controls of the TV.
To increase the headphone volume, press the volume button on the TV
or remote control. When headphones are plugged into the TV, the loud
speakers are automatically muted.