Magma DM10-016LP User Manual

Page 7

INSPECTION OF HOSES

1.Visually inspect all

hoses prior to each
use

of the grill.

2. Remove the

inspection panel
located on the rear
of column near the
top by rotating the
locking
mechanism.

3. Lift the panel

clear of the
column.

4. Using a flashlight if

necessary, inspect the gas
delivery hose, and the upper
end of the gas supply hose,
from this area.

5. If either hose shows excessive

wear, abrasion, cutting, or
other damage, it must be
replaced prior to using grill,
(the valve and gas delivery
hose is one assembly). Replace
the hoses only with those
specified by the manufacturer.

6. Open the access

panel at the
bottom rear of
the column.

7. Remove the

propane canister
by unscrewing it
(counter-
clockwise) from
the regulator
assembly.

8. Using a flashlight if

necessary, visually inspect
the regulator and bottom
end of the gas supply hose
from this area.

9. If the hose shows excessive

wear, abrasion, cutting, or
other damage, it must be
replaced prior to using the
grill. Replace the hose only
with one specified by the
manufacture.