Philips Magnavox 20MS3442/17 - Manual (Page 8)

Basic TV and Remote Control Operations
Press POWER to t ur n on t he TV.
Press VOL. to increase the sound
level. Press VOL. to lower the sound
level.
Press CH. or CH. to select TV channels.
Press MENU to see the TV on-screen
menu. In the menu, use VOL. / and CH.
buttons to make adjustments or sel-
ections.
You can press MENU on either the remote
control or the front of the TV to access or
remove the menu.
Television
Remote control
Point the remote control toward the remote
sensor on the front of the TV when
operating the TV with the remote control.
Battery Installation
Remove the battery compartment lid on
the rear of the remote. Press in the tab,
then lift off the lid.
To load batteries into the remote control:
Place two AA batteries in the remote. Be
sure the (+) and (-) ends of the batteries
line up correctly (as marked inside the
battery compartment).
Reattach the battery compartment lid.
The channel number will
appear briefly when you
change channels. Or, press
DISPLAY on the remote to
see the channel number.
Press TV/AV on the front of
the TV to choose AV1/S-
Video, AV2, or YUV.
Helpful Hints
8
TV/AV SENSOR
STANDBY
POWER
s
/
Battery
Installation