Makita DCS 6800I - Manual (Page 17)

17
Guide bar and saw chain combinations meeting kick-
back requirements of ANSI B 175.1-1991 for the use
in the
USA
Models MAKITA DCS 6000i, 6800i
GUIDE BAR SAW CHAIN
length pitch part no. part no.
16" (40 cm) 3/8" 443 040 661 523 102 659
18" (45 cm) 3/8" 443 045 661 523 102 664
21" (53 cm) 3/8" 443 053 661 523 102 672
Drive link gauge: .050", Chain sprocket: 7 teeth
Guide bar and saw chain combinations meeting kick-
back requirements of CSA Z62.3-96 for the use in
CANADA
Models MAKITA DCS 6000i, 6800i
GUIDE BAR SAW CHAIN
length pitch part no. part no.
15" (38 cm) 3/8" 443 038 651 522 094 656
18" (45 cm) 3/8" 443 045 651 522 094 664
21" (53 cm) 3/8" 443 053 651 522 094 672
Drive link gauge: .058", Chain sprocket: 7 teeth
WARNING
Do not use other replacement bars and chains unless they have been designated as meeting the ANSI B 175.1-1991
(for USA) and CSA Z62.3-96 (for Canada) kickback performance requirements on that specific powerhead, or has
been designated as "low kickback" saw chain in accordance with the ANSI B 175.1-1991 (for USA) and CSA
Z62.3-96 (for Canada) standard.
Approved bar and chain combinations
"Low-kickback saw chain is a chain which has met the kickback performance requirements of ANSI B 175.1-1991
(American National Standard for Power Tools-Gasoline-Powered Chain Saws-Safety Requirements) when tested on
the representative sample of chain saws below 3.8 c.i.d. specifed in ANSI B 175.1-1991". The approved bar and chain
combinations are low kickback chains according to ANSI B 175.1 and also meet the kickback requirements of CSA
Z62.3-96 for chains saws below 80 cm
3 .
** with Limiter Caps
Stroke volume cu. in 3.6 (60 cm 3 ) 4.1 (68 cm 3 )
Bore inch 1.81 (46 mm) 1.92 (49 mm)
Stroke inch 1.41 (36 mm) 1.41 (36 mm)
Max. power at speed kW / rpm 3.1 / 9,000 3.6 / 9,000
Max. torque at speed Nm / rpm 3.7 / 6,000 4.2 / 6,000
Max. engine speed with bar and chain rpm 13,000 12,500
Idling speed rpm 2,400 2,400
Coupling speed rpm 3,500 3,500
Sound Pressure Level at the operator’s ear at
full load according to ANSI B 175.1
db(A) 105 105
Sound Pressure Level at the bystander’s position
(50 ft/15m distance) according to ANSI B 175.1
db(A) 82,4 82,8
Carburetor (diaphragm carburetor) ** Type TILLOTSON HS 286 TILLOTSON HS 286
Ignition system Type electronic electronic
Spark plug Type NGK BPMR 7A NGK BPMR 7A
Electrode gap inch .020 .020
Fuel consumption at max. load kg/h 1.49 1.73
Specific consumption at max. load g/kWh 484 471
Fuel tank capacity oz 26.6 26.6
Chain oil tank capacity oz 13.3 13.3
Mixture ratio (fuel/two-stroke oil) see chapter „Fuel”
Chain brake Engages manually or in case of kickback
Weight (fuel tank empty, without chain and guide bar) 14 lbs 9 oz. 14 lbs 9 oz.
Technical data
DCS 6000i DCS 6800i