Micronics 60/66MHz - Manual (Page 28)

4-3
The BIOS Setup Utility
Running the Setup Procedure
If the system halts while booting, press and the CMOS Main Screen
(Figure 4-2) should appear with the prompt on the time line. If the system
does not halt and a DOS prompt does appears (i.e., A:\ or C:\), press the
, , and keys simultaneously to begin the Setup procedure.
The M5Pi system board has two CMOS configuration screens: the Main
Screen (Figure 4-2) and the Extended Screen (Figure 4-3). To toggle between
the screens, press the PgUp/PgDn keys.
Figure 4-2 CMOS Main Screen
Now, configure the parameters to match your specific requirements. See the
following pages for procedures on how to set the computer’s parameters.
To return to the CMOS configuration screens at any time to change or view
any of these parameters, press , , and simultaneously.