Micronics 60/66MHz - Manual (Page 36)

POST Messages
A-3
Message Possible Cause Solution
DISKETTE READ
FAILURE, or NOT A
BOOT DISKETTE, or
NO BOOT DEVICE
AVAILABLE Hard/floppy disk failed or
is not bootable. Replace the diskette with
a bootable diskette and
retry.
DECREASING
AVAILABLE
MEMORY, or
MEMORY FAILURE
AT AAAAAAAA
READ XXXX
EXPECTING YYYY
(where AAAAAAAA
= failing address,
XXXX=data read,
and YYYY=data
written) The memory data
integrity failed. Check contact points
between memory
modules and system
board. Replace memory
modules if necessary.