Muratec F-320 - Manual (Page 106)

Bypass Tray priority
If you set the same sized paper to both the paper cassette and bypass tray, and this
mode is turned to on, the machine gives priority to use the paper which is set on the
bypass tray than the paper in the cassette.
To adjust the copy print settings
Default setting: Copy reduction rate: 100%, Margin: 24 mm, Bypass tray priority: Off
1 Press MENU , 2, 3, 2, ENTER . The LCD shows the current reduction rate for copy-
ing:
2 Press or until the reduction setting you want appears.
3 Press ENTER to save the setting. The LCD shows the current print margin:
4 Use the numeric keypad to enter the print margin you want. If necessary,
press
or to move the cursor.
5 Press ENTER to save the setting. The LCD shows the current setting for bypass
tray priority:
6 Press or until the setting you want appears.
7 Press ENTER to save the setting.
Bypass Priority :Off
$ $
/
# #
/Enter
Margin
(00-85) 24 mm
Prt Reduc.Rate :100%
$ $
/
# #
/Enter
Changing the default settings
4.7