MITSUBISHI ELECTRIC LaserVue L75-A94 - Manual (Page 32)

32 3 HDMI Control of CEC Devices
For assistance call 1(877) 675-2224
Using H DMI Control
As an example of using HDMI Control, press PLAY on
the device itself to:
• Power on the TV
• Switch to the device (no need to display the
Input Selection menu)
• Begin play of the device
Direct Keys
Test your equipment with the TV’s remote control to
find additional supported commands. See the table
below for commands that may be available, depending
on the individual device.
CEC-enabled VCR, DVD, and DVR functions that
may be available:
Record/
Playback
Menu
Navigation
Channel
Tuning
Other
CH GUIDE
ENTER
Digits 0–9,
CANCEL
TOOLS
Check the
TOOLS menu
for supported
functions.
CANCEL
(to cancel)
ENTER
If you have a CEC-enabled A/V receiver, CEC-enabled
devices connected to the A/V receiver with an HDMI
cable may also be controllable. They can be selected
from the TV’s Input Selection menu.
CEC-enabled A/V receiver functions that may be
available:
• Try the VOL, MUTE, and menu-navigation keys.
• To open the A/V receiver menu, follow these steps:
1. While watching TV, press AUDIO.
2. Press until the TV Speakers option displays.
3. Press to select Off (to send audio to the A/V
receiver).
4. Press INPUT and highlight the A/V receiver icon
in the Input Selection menu.
5. Press TOOLS.
6. Select Menu from the Tools menu.
Resolving CEC Conflicts
Because each manufacturer selects which CEC func-
tions to support, some devices may conflict with other
devices. If control conflicts arise, you can:
• Turn off TV control of an individual CEC-enabled
device (see below).
• Turn off CEC in the device itself. Refer to the
device’s Owner’s Guide for instructions.
Turning Off the TV’s HDMI Control of a CEC
Device
1. Press MENU on the TV remote control.
2. Highlight Inputs > HDMI Control.
3. Move to the device name and press ENTER to select
Off to turn off the TV’s ability to control the device.
4. Press EXIT to clear the menu.
Inputs > HDMI Control menu
Remo ving an HDMI Device
1. Power off the device.
2. Disconnect the HDMI cable.
3. Press MENU on the TV remote control to enter the
TV main menu.
4. Go to Inputs > Name.
5. Highlight the HDMI input name and press ENTER to
select Delete.
6. Press EXIT to clear the menus.
Inputs > Name menu with Delete selected for HDMI-3.