Philips Magnavox VRC602M - Manual (Page 33)

POWER
EJECT
VCR/TV SPEED TIME SEARCH
SLOW ENTER
1 2 3
4 5 6
7 8 9
0
CH. VOL.
MEMORY ALT.CH
REW
PLAY
F.FWD
REC
/OTR
PAUSE
/STILL
STOP
MUTE
VCR CBL/DBS TV
MENU STATUS/EXIT CLEAR
Timer Recording (cont’d) 33
6
Repeat steps 1-4 to make sure you have cleared the cor-
rect timer recording.
1
With the VCR on and in VCR position (the VCR light will appear
on the display panel), press the VCR button, then press the
MENU button.
Checking or Cancelling Timer Recordings
2
Press the PLAY/o button or the STOP/p button to select
PROGRAM, then press the F.FWD/B button.
3
Press the PLAY/o button or the STOP/p button to select
PROGRAM REVIEW, then press the F.FWD/B button.
The timer recording information for the program in the lowest
numbered slot will appear on the screen. If no timer recordings
are set, nothing will happen when you press the F.FWD/B button.
4
Press the F.FWD/B button repeatedly to review all pro-
grammed timer recordings. If you don’t press the F.FWD/B
button within 10 seconds, the VCR will automatically display infor-
mation about the next programmed timer recording. This will
continue until all timer recordings have been displayed. Then the
menu will disappear.
5
To cancel the timer recording displayed, press the
CLEAR button. Either the display will disappear or information
about other timer recordings will appear. If you do not press any
other buttons, the display will disappear after all timer recordings
have been displayed.
5 2-4
1
• CLASH may flash on the screen when you
finish setting a timer recording. This
means that the timer recording you just
programmed and another timer recording
overlap. The current timer recording will
not take place. You may choose to cancel
the overlapping timer recording.
• To stop a started timer recording, press
the STOP/EJECT button on the VCR.
• The VCR may lose timer recordings if the
power fails. Reset the channels and the
clock before resetting the timer recordings.
Details are on pages 11 and 15.
• If the preset time for a timer recording
comes up during an OTR, the OTR has
priority. A message will remind you when
the timer recording was scheduled to
begin. You may let the OTR continue; the
timer recording will not take place. Or,
stop the OTR and turn off the VCR imme-
diately. The timer recording will take place
if you turn off the VCR before the timer
recording’s scheduled start time.
See page 44 for more hints.
Helpful Hints