Miller Electric Big Blue 452P - Manual (Page 49)

OM-496 Page 43 Return To Table Of Contents
Every 1000 h
Blow Out Or
Vacuum Inside.
During Heavy
Service,
Clean Monthly.
OR
Drain Sludge
From Fuel
Tank. See
Section 9-7.
FUEL
SLUDGE
Service Welding
Generator Brushes And
Slip Rings. Service More
Often In Dirty Conditions.*
Change Fuel
Filters. See
Section 9-7.
Check
Valve
Clearance.*
Check Radiator
Fluid Level. See
Section 5-7.
Every 2000 h
Clean/Set Injectors.*
Notes
16 Gauge (.063 in)
22 Gauge (.031 in)
24 Gauge (.025 in)
20 Gauge (.037 in)
18 Gauge (.050 in)
14 Gauge (.078 in)
1/8 in (.125 in)
3/16 in (.188 in)
1/4 in (.25 in)
5/16 in (.313 in)
3/8 in (.375 in)
1/2 in (.5 in)
MATERIAL THICKNESS REFERENCE CHART