Miller Electric pmn - Manual (Page 16)

OM-228 305 Page 12
4-4. Torch Dimensions And Weight
Ref. 802 877
3.0 lb (1.4 kg)
1 in
(25 mm)
8-3/8 in
(213 mm)
1-3/8 in
(35 mm)
4-5. Selecting A Location
loc_2 3/96 - Ref. 804 486-A / 804 487-A / 804 488-A
1 Lifting Handle
Use handle to lift unit.
2 Hand Cart
Use cart or similar device to move
unit.
3 120 VAC Receptacle
To connect unit to 230 VAC input
power, a customer supplied plug is
necessary (see Section 4-9).
Locate unit near correct input
power supply.
! Special installation may be
required where gasoline or
volatile liquids are present −
see NEC Article 511 or CEC
Section 20.
Movement
Location And Airflow
Dimensions And Weight
49 lb (22.2 kg)
not including torch
*Add 13/16 in (21 mm) for handle.
16 in
(406 mm)
8-1/2 in
(216 mm)
12-5/16 in*
(313 mm)
1
2
10 in
(254 mm)
10 in
(254 mm)
.
Serial Number/Rating Label located on
rear panel of plasma cutter; use label to
determine input power for unit.
3