Mr. Coffee ECMP3 - Manual (Page 9)

After cleaning, move the filler clip
backward (Figure 27).
The filter holder may be stored
screwed onto the appliance
(Figure 28).
CLEANING
Wash the fil
ters, the filter holder,
the water tank, the drip-basin and
grid regularly.
Regularly clean the brew head,
removing any stuck grains
of coffee.
Clean the frothing nozzle,
particularly after frothing milk, with
a damp clolh. If necessary, the
fro
thing nozzle can be unscrewed
in a counter-clockwise direction
using the end of the measuring
spoon and then it can be cleaned
(Figures 29 and 30). The nozzle
must be screwed on again in a
clockwise direction. Tighten using
reasonable force with the end of
the measuring spoon provided.
The exterior of the unit may be
cleaned with a damp clo
th.