Miller Electric Spectrum 2050 - Manual (Page 3)

3
Genuine Miller Accessories
No. 50HD Cart
#300 026
This heavy-duty cart
accommodates the
Spectrum 125C, 375,
625, 2050, 1000 and
1251.
No. 30A Economy
Running Gear and Cord
Wrap #195 093
Economical running
gear with angle for easy
front panel access
provides storage for
gloves and tools.
Protective Cover
#195 271
Mildew-resistant,
odor-free, waterproof
cover protects your
machine’s finish.
Adapter Cord, Full KVA #300 158
NEMA 14-50P to NEMA 6-50R. Adapts
engine drive 120/240 V plug to Spectrum
®
240 V plug.
RTI Filter and Bracket
#195 425
Dryer will remove water, dirt
and oil as small as one
micron with 99.9% efficiency.
Can be mounted on plasma
cutter or on wall. Install as
close as possible to point of
air consumption.
Motor Guard Air Filter #042 306
This filter is equipped with a mounting
bracket that allows installation on the top,
side, or rear panel of most plasma cutters.
The filter is equipped with a 1/4 in NPT port
to match the fittings on most plasma systems;
it has a rated airflow of over 45 SCFM.
Miller Service Parts Accessories
The following accessories must be
ordered from Miller Service Parts.
RTI Replacement Filter Element #212 771
Replacement filter for #195 425.
Motor Guard Replacement Filter Element
#042 312
Carton of four filters for use with motor
guard air filter #042 306.
Remote Pendant Control #180 605
Provides remote start and stop of the arc
for the ICE-55CM machine-held torch.
ICE-55C Consumable Kit
#222 941
Consumable kit includes
4 standard electrodes, 4
standard tips, 2 ext
electrodes, 2 ext tips, 1
gouge tip, 1 gouge shield, 1 drag shield, 1
retaining cup, 3 o-rings and silicone grease.
Plasma Circle-Cutting
Guide #195 981
Cut straight lines or
circles up to 12"
diameter with ease.
Suction/Magnetic
Pivot Base
#195 979
Add this to your cutting guide for convenient
attachment to all flat surfaces. The extended
arm accommodates holes up to 30" diameter.
Torch Cable Covers
#231 867 25 ft (7.6 m)
#231 868 50 ft (15.2 m)
240 V Plug #119 172
For connection to Bobcat,
Trailblazer or Hobart Champion
10,000 with a minimum of
8 KVA auxiliary power.
In-Line Air Filter Kit
#228 926
Mounts to the back of the
Spectrum
® 375 X-TREME ™ , 375,
625, 2050, 1000, 1251. Includes
male and female1/4 in NPT quick
disconnect fittings and hose for easy on/off
connection. The replaceable filter element
filters to .85 microns.
In-Line Air Filter Replacement Element
#228 928
Includes 1 replacement filter for in-line filter
#228 926.
MIG Gloves
#227 821 Small
#227 822 Medium
#227 823 Large
#227 824 X-Large
For medium-duty MIG welding and
metalworking tasks. Combination of
durable top grain cowhide palm and
abrasion-resistant pig split back sewn with
Kevlar
® thread.
Metalworker Gloves
#227 817 Small
#227 818 Medium
#227 819 Large
#227 820 X-Large
Designed for the daily demands of the
metalworker and material handler. Padded,
goatskin palm with textured G-Grip
™ patch
for excellent grip. Neoprene wrist with
Velcro
® closure for improved fit. NOT
intended for use while welding.
Engine Drive Compatibility
Female
Receptacle
Equipment Generator Power Steel Quality Cut (Approximate) Spectrum Output Amp Setting
Bobcat ™ 250, Trailblazer ® 302 & 275 DC 11 kW 3/4 in 50 A, 240 V, full KVA plug
Bobcat ™ 225 10.5 kW 3/4 in 50 A, 240 V, full KVA plug
Miller Legend ® 302 5 KW 1/2 in while not welding 35 A, 240 V, full KVA plug
PipePro ® 304, PRO 300 12 kW 3/4 in 55 A, 240 V, full KVA plug
Big 40 ® CC/CV 15 kW (optional) 3/4 in 55 A, 240 V, full KVA plug
Big Blue ® 500 CC/CV 20 kW (optional) 5/8 in 55 A, 240 V, full KVA plug
Note: Includes Spectrum 2050 models manufactured after (and including) serial number KJ283702. LP powered machines need to be derated 15%.