Din-rail mounting, Mounting dimensions – Moxa Technologies EDS-205 User Manual
Page 4
Mounting Dimensions
DIN-Rail Mounting
The plastic DIN-Rail attachment plate should already be fixed to the rear panel
of EDS when you take it out of the box. If you need to reattach the DIN-Rail
attachment plate to EDS, make sure the DIN-Rail kit is situated towards the top,
as shown in the figures below.
STEP 1:
Insert the top of the DIN-Rail into
the slot.
STEP 2:
The DIN-Rail attachment unit will
snap into place as shown below.