4-8. spanning tree, 4-8. set spanning tree – Milan Technology MIL-SM808G User Manual

Page 78

Text mode
Original mode

5-4-8. Spanning Tree

The Spanning-Tree Protocol (STP) is a standardized method (IEEE 802.1D)
for avoiding loops in switched networks. When STP is enabled it ensures
that only one path at a time is active between any two nodes on the network.

Spanning-Tree Protocol can be enabled using web management’s switch
setting advanced item, and selecting enable Spanning-Tree protocol. By
default, spanning tree is disabled on the switch.

It is recommended that STP be enabled on all switches to ensure a single
active path on the network.