3-2. port/trunk configuration, 3-2. port / trunk configuration – Milan Technology MIL-SM808G User Manual

Page 25

4-3-2. Port / Trunk Configuration

This page can change every port status and configure trunk groups.
Press TAB key to change the configuration of each item.

1. Enabled: User can disable or enable the port. Port 9 is always enabled.
2. Auto Negotiate: Ports 1 to 8 (100Mbps Fiber) are disabled, Port 9 (GBIC

port) is enabled.

3. Speed/Duplex Config: Ports 1 to 8 (100 Mbps Fiber port) can be set for

full-duplex or half-duplex mode. Port 9 (GBIC port) is fixed at 1000Mbps
full-duplex mode.

4. Flow Control: User can set flow control function to be on or off for ports

1 to 8. Flow control for Port 9 (GBIC port) is fixed at enabled (on).

5. Group: User can set trunk groups for ports 1 to 8. There are four possible

trunk groups. Port 9 is not available for trunk groups.

Actions->

: Exits the port configuration page and returns to previous menu.
: Configures all items. When finished, pressing ESC returns to the
action menu line.
: Saves all configured values.