Martin Audio CS10 - Manual (Page 2)

1
Preliminary User Guide
CS10 & CS10T ceiling subwoofers
C10.1R & C10.1C full-range 10” ceiling loudspeakers
(including transformer versions C10.1RT and C10.1CT)
Unpacking
Thank you for purchasing a Martin Audio ceiling loudspeaker system.
Every Martin Audio loudspeaker is built to the highest standard and
thoroughly inspected before it leaves the factory. After unpacking the
system, examine it carefully for any signs of transit damage and
inform your dealer if any such damage is found. It is suggested that
you retain the original packaging so that the system can be repacked
at a future date if necessary. Please note that Martin Audio and its
distributors cannot accept any responsibility for damage to any
returned product through the use of non-approved packaging.
Compliance
These products conform to the requirements of the EMC
Directive 89/336/EEC and the Low Voltage Directive 73/23/EEC
Safety warning
Do not allow these ceiling loudspeakers to be supported by the
ceiling grid alone. These ceiling loudspeakers must be attached
to a secure part of the building.
All material © 2007. Martin Audio Ltd. Subject to change without notice.