Mitel M I T E L 8620 - Manual (Page 52)

Call Features
Page 38 Mitel ® 8620/8622 IP Phone User Guide – Issue 13, September 2009
Using Remote Programming to Change DND Settings
See “Using Do-Not-Disturb” on page 43 for more information about using DND.
To use Remote Programming to turn on DND:
1. Do one of the following:
•
Call your DISA number (provided by your system administrator). If necessary, enter
your DISA password.
•
Use any phone on the system.
2. Dial 359.
3. Enter your extension number.
4. Enter your password followed by #.
5. Dial 370.
6. Enter the DND message number (01 to 20), and then enter the second-line message
text (if applicable).
To use Remote Programming to turn off DND:
Follow previous steps 1 through 4, and then dial 371.
Using Remote Programming to Forward Calls
See “Manual Call Forwarding” on page 31 for more information about Manual Call Forwarding.
To use Remote Programming to turn on Manual Call Forwarding:
1. Do one of the following:
•
Call your DISA number (provided by your system administrator). If necessary, enter
your DISA password.
•
Use any phone on the system.
2. Dial 359.
3. Enter your extension number.
4. Enter your password followed by #.
5. Dial one of the following Call Forwarding feature codes:
•
355 (All)
•
356 (No answer)
•
357 (Busy)
•
358 (No Answer/Busy)
6. Enter either an extension number or 8 followed by a telephone number.
To turn off Call Forwarding:
Dial 355, and then hang up.