Memorex MX4501 - Manual (Page 15)

14
With the unit on, press the
FUNCTION button repeatedly
until CD is selected; one of the
Disc indicator will blink and the
other disc indicators will light.
1
1
Press the STOP (
■
) button
1
to
stop automatic playback. Press
the PROGRAM/MEMORY/
CLOCK SET button
2
; “P-01”
(program number) will appear
briefly, then “MEM” and “01”
(track number) will blink in the
display.
2
1
2
PROGRAMMED PLAYBACK
The CD player in this unit has a 20 track programmable memory that allows you to program up to 20 tracks
on any disc for playback in any desired order. You may program 20 different tracks or you may also program
certain tracks to play more than once.
IMPORTANT: You can only program tracks on the selected disc, not all of the inserted discs.
To perform programmed playback, proceed as follows:
PROGRAMMED PLAYBACK SECTION CONTINUED ON NEXT PAGE.
OPERATING INSTRUCTIONS (CONTINUED)
To play the tracks on the desired
CD in a random order. Press a
Disc Select button (1 through 5)
1
to select the desired disc, then
press the STOP (
■
) button
2
to
stop the playback. Press the CD
MODE button
3
three times;
“RND” will appear in the display.
3
2
1
1
Press the PLAY/PAUSE button to
start random playback of the
selected disc. The CD player will
play back all the tracks of the
selected disc randomly, then it will
skip to playback the tracks on
next disc in Normal sequence
order. Playback will continue until
all the tracks on all the discs have
played.
2
To cancel random playback,
press the CD MODE button until
"RPT" and "RND" disappear from
the display.
3
RANDOM PLAYBACK
NOTE: The Random feature will randomly play the selected disc, not all of the inserted discs.