Installing the appliance – Miele KFN 9755 iDE EN User Manual
Page 52

^ Open the appliance doors.
^ Use a flat-head screwdriver to
remove the cover
g from the upper
edge of the appliance.
^ Fit the cover h onto the mounting
bracket
i.
^ Using the screws j (M5 x 15), screw
the mounting angle
i onto the upper
part of the appliance.
^ Fit the cover k onto the mounting
bracket
l.
^ Using the screws m (M5 x 15), screw
the mounting angle
l onto the lower
part of the appliance.
^ Pull the protective foil off of the piping
strip
n.
^ Flush-mount the piping strip onto the
side of the appliance where the door
is opened.
To do so, fit the strip to the lower
edge of the upper cover
h and trim it
2 - 3 mm above the lower mounting
bracket
l.
^ Now push the appliance far enough
into the installation space that the
covers
h and k are flush with the
front edge of the cabinetry side wall.
Installing the appliance
52