Miele DG 4064 - Manual (Page 50)

Programme option* Status** Setting
P 1 Buzzer volume S 00 Very quiet
S 01 Quiet
S 02 Medium
S 03 Loud
P 2 Audible tone at end of
programme S 00 Single beep
S 01 Beeps for a short time
S 02 Beeps for 5 minutes
P 3 Safety lock S 00 Not possible
S 01 Possible
P 4 Programme in display after
switching on S 00 Steam with pressure
S 01 Steam without pressure
S 02 Reheat
S 03 Defrost
S 04 Last programme selected
P 5 Water hardness S 01 Soft
S 02 Medium
S 03 Hard
S 04 Very hard
P 6 Location (altitude) S 00 Below 1000 m
S 01 Above 1000 m
P 7 Altering the temperature S 00 In 5° increments
S 01 In 1° increments (note that
when warming up, the
temperature of the appliance
will continue to be shown in
5° increments)
P 8 Demonstration mode and
factory default settings S 00 Demonstration mode on
S 01 Demonstration mode off
S 09 Factory default settings
reinstated
* Programmes not shown here have no allocation.
** The factory default settings are shown in bold.
Programming
50