Operation 19, Before each use 19, Programming steps in brief 19 – Miele DG 4064 User Manual
Page 19: Operation, Before each use, Programming steps in brief
Before each use
Check that
-
the stopcock is open.
-
the filter at the bottom of the
appliance is correctly
positioned to prevent pieces of
food blocking the drain.
-
the door is properly shut.
The steam oven is then ready for
use.
Programming steps in brief
A Close the steam oven door.
B Switch the appliance on.
C Select a programme.
D Adjust the recommended
temperature if required.
E Set the duration.
F Start the programme.
These steps are described in more
detail on the following pages.
Operation
19
See also other documents in the category Miele Kiln:
- H397BP2 (84 pages)
- DG4082 (56 pages)
- DG 5070 (64 pages)
- H 4684 B (76 pages)
- H4842BP (68 pages)
- H4780B (76 pages)
- H 4260 (76 pages)
- H4780BP (76 pages)
- H 4846 BP (68 pages)
- MNTSVBE (20 pages)
- H 4160 (72 pages)
- MLT 4701 (8 pages)
- DG 2551 (72 pages)
- H 4170 (72 pages)
- DG2661 (60 pages)
- H4680B (76 pages)
- H4082BM (72 pages)
- H4210 (64 pages)
- H4682B (20 pages)
- H4881BP (76 pages)
- H 387-1 B KAT (76 pages)
- H 5961 B (84 pages)
- H4742BP (64 pages)
- H 5460-BP (64 pages)
- DG4080 (60 pages)
- H 344-2 B (76 pages)
- H4880B (76 pages)
- H4782BP (76 pages)
- H 4688 B (76 pages)
- 38ACR (4 pages)
- H 4746 BP (64 pages)
- H4881B (76 pages)
- H397B2 (84 pages)
- H395B (80 pages)
- H 396 BP (80 pages)
- H4882BP (80 pages)
- H 267 B (60 pages)
- H4890BP2 (80 pages)
- H4880BP (76 pages)
- DG155-1 (12 pages)
- H4890B2 (76 pages)
- H 4242 B (56 pages)
- DG155-2 (12 pages)
- H 4681 (60 pages)