beautypg.com

Philips Magnavox 19MF338B User Manual

Page 8

background image

EN-7

ENGLISH

FRANÇAISE

ESP

AÑOL

4.

Get started

This section describes how to position and connect

your TV, and how to perform your first-time

installation.

Position the TV

4.1

WARNING

B

Do not insert the power plug into the wall

socket before all the connections are made.
Large screen TVs are heavy. Two people are

required to carry and handle the TV.

Wherever you decide to position your TV, ensure

that you always have easy access to the AC power

cord or plug to disconnect the TV from the power.
If the TV is mounted on a swivel base or swivel arm,

ensure no strain is placed on the AC power cord

when the TV is swivelled. Strain on the AC power

cord can loosen connections. This may cause arcing

and result in fire.
For ideal viewing conditions, position the TV where

light does not fall directly on the screen.
The ideal viewing distance for watching TV is three

times its screen size.
Kensington security slot
Your TV is equipped with a Kensington Security Slot

at the back of the TV.

If you connect an anti-theft Kensington lock

(not supplied), position the TV within reach of a

permanent object that can be attached to the lock.

Wall mount the TV

4.2

WARNING

B

Wall mounting of the TV should only be

performed by qualified installers. Koninklijke

Philips Electronics N.V. Bears no responsibility

for improper mounting that results in accident

or injury.

Step 1 Purchase a VESA-compatible wall

bracket
Depending on the size of your TV screen, purchase

one of the following wall brackets:

TV screen size

(inches)

VESA-compatible

wall bracket type

(millimeters)

Screw type

19MF338B

100 x 100 mm

Metric 4 x 10mm

Step 2 Remove the TV stand

Note

D

These instructions are only applicable to TV

models with mounted stands. If your TV stand is

not mounted, skip to Step 3 Connect cables.

Carefully place the TV face down on a flat, stable

1.

surface that is covered by soft cloth. The cloth

should be thick enough to protect your screen.

Using a cross-head screwdriver (not supplied),

2.

unscrew the three bolts that secure the stand

to the TV.