Maytag MDE 9801 - Manual (Page 10)

10
Buzzer
The machine offers you the possibility of hea-
ring when the cooling period ends. Set the op-
tion Buzzer on
and it will sound for three
seconds when the programme is completed.
Anti-crease
You can select the anti-crease option to
prevent the fabrics from lying still and beco-
ming creased at the end of tumble drying. This
is a helpful option if you are unable to take out
the fabrics promptly at the end of the tumbling
phase.
You can choose a programme duration of 1, 2
or 3 hours. The drum will then continue to
rotate intermittently, i.e., three seconds every
minute for the number of hours chosen.
If you choose Buzzer ON, a signal will sound
each time the drum rotates.
TEMPERATURE
You can select Low temperature for the
Extra dry, Dry, Normal dry and Iron dry pro-
grammes.
DRYING TIME
The drying time may be influenced by a number
of factors, such as the size of the load, the pro-
gram selected, the moisture content of the load,
the materials being washed, connection capaci-
ty and the ambient temperature and humidity.
Drying time remaining is calculated within four
minutes of the start of the drying program. The
estimated time is shown in the bottom right-
hand corner of the display, together with the –
symbol.
If the actual drying time is less than that calcu-
lated, the time display may jump ahead, e.g.
from 50 to 20 minutes, at the end of the pro-
gram.
If the actual drying time is longer than that
calculated, the countdown will stop at the end
of the progam until the load is dry.
Please note that times include a cooling period.
The remaining drying time is estimated ap-
proximately (within four minutes of the start of
the drying programme) and is shown on the
display in intervals of five minutes.