Makita 1912B User Manual

Page 10

Text mode
Original mode

First, loosen the two wing nuts on the holder and insert the
blades (A) and (B), so that they contact the sides (C) and (D).
Then tighten the wing nuts.

Immerse the dressing stone in water for 2 or 3 minutes
before sharpening. Hold the holder so that the blades both
contact the dressing stone for simultaneous sharpening at
the same angle.

To maintain product SAFETY and RELIABILITY, repairs, car-
bon brush inspection and replacement, any other mainte-
nance or adjustment should be performed by Makita
Authorized or Factory Service Centers, always using Makita
replacement parts.

1. Wing nut
2. Blade(A)
3. Blade(B)
4. Side(C)
5. Side(D)

001611

001612