MITSUBISHI ELECTRIC 1770G - Manual (Page 6)

ii
Safety Instructions for Display Monitors
1. The AC plug isolates this equipment from the AC Power supply.
2. Unplug the monitor from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning.
3. Slots and openings in the cabinet and the back or bottom are provided for
ventilation. They must not be blocked or covered. This computer monitor should
never be placed near or over a radiator or heat register, or in a built-in installation
unless proper ventilation is provided.
4. This monitor must be operated from the type of power indicated on the rating
label. If you are not sure of the type of power available, consult your dealer or local
power company.
5. This monitor must be operated with a 3-wire grounding-type plug, a plug having a
third (grounding) pin. This plug will only fit into a grounding-type power outlet.
This is a safety feature. If you are unable to insert the plug into the outlet, contact
your electrician to make the necessary outlet changes.
6. Never push objects of any kind, or spill liquid of any kind into the monitor.
7. Do not attempt to service this product yourself, as opening or removing covers
may expose you to dangerous voltages or other risks. If any above mentioned
misuse or other accident (such as dropping, mis-operation) occurs, contact
qualified service personnel for servicing.
8. Use only the proper type of power supply cord set (provided in your monitor’s
box) for this unit. It should be a detachable type with approved cable and
connectors for use in Australia and New Zealand.
9. The power socket outlet shall be near the equipment and shall be easily accessible.