MITSUBISHI ELECTRIC 1770G - Manual (Page 17)

9
Unbalance: adjusts the pincushion balance if both sides of the display
are bowed toward the left or right.
Trapezoid: makes the vertical edges of the display parallel.
Parallelogram: aligns the top and bottom edges of the image.
Top corner: adjusts the edge curvature at the top corners of the image.
Bottom corner: adjusts the edge curvature at the bottom corners of the
image.
3. Colour Adjustment
Colour mode Colour Temperature
(Preset Mode)
Colour Temperature
(User Mode)
C1 (9300K) 9300K User Mode 1
C2 (6500K) 6500K User Mode 2
Colour Preset Mode: In this mode, C1 to C2 are two memory areas where the
factory-preset colour settings are stored. These settings are fixed and can not be
modified.
Colour User Mode: Press
or to locate the colour mode and Enter to choose a
colour. Press or again to make the adjustment. If you want to reset to preset
modes, please locate to recall the preset colour settings