Electrolux EW 970 C - Manual (Page 34)

Description of the appliance
Control panel
Push-button switches
(ON/OFF) – After selecting the wash programme
and temperature, push this button in to start the
machine. (See 8, Indicator light).
– An optional function. When this button is
pressed in, the programme will halt at the end of
the last rinse, and the rinse water will be retained
in the machine. This function is available for the
Synthetics, Delicate and Wool programmes, to
minimise creasing in synthetic fibres.
Once the programme has halted on rinse-hold, if
you wish to end the wash with both emptying of
water and spinning of the load, press the option
button again so it pops out. If you wish to end the
wash by emptying the water without spinning, you
have to advance the programme control knob
manually, to programme setting L. Before you
advance the programme control knob manually, we
recommend that you first press the On/Off button to
switch the machine off (button pops out). Once the
programme control knob is set at L, press the
On/Off button again (button remains in) to complete
the programme.
Knob controls and detergent dispenser
Temperature control – For setting temperatures
between and 90°. Follow care label recom-
mendations.
Programme control – For setting programme
type. See Programme Chart page. 36 - 37.
Detergent dispenser – With separate compart-
ments for detergent and fabric conditioner.
Pre-wash detergent is to be added straight
into the drum.
Indicator light – Comes on approx. 5 seconds
after the ON/OFF button is pressed, when the
door is locked electrically and the machine
starts. The light goes out approx. 2–3 minutes
after the end of the programme and the door
is unlocked.
Space for program chart (Self-adhesive label)
5
1
2
3
4
5
6
7
1 2 3 4
- 34 -
6 7