MITSUBISHI ELECTRIC MLM400 - Manual (Page 17)

15
Connecting your DVD player to your LCD monitor will enable you to display your DVD video.
Refer to your DVD player owner’s manual for more information.
LCD monitor (second monitor)
To RGB3 DVD/HD IN
BNC x 3
BNC x 3
To D VD Component video output
To
audio right output
RCA BNC x 3
BNC x 3
BNC-to-RCA adapter To audio left output
DVD player
LCD monitor
EXIT MUTE INPUT
Connecting to a DVD Player
• To connect the RGB 3 DVD/HD In connector (BNC) on the LCD monitor, use a separately available BNC connector cable. You will need a BNC-
to-RCA adapter to connect a DVD player with an RCA pin jack to the BNC connector cable (not provided).
Some DVD players may have different connectors, such as Cr/Pr, Y and Cb/Pb.
Select [DVD/HD] input mode from the INPUT button.
When connecting one or more LCD monitors, use the RGB 3 OUT connectors (BNC).
The AUDIO IN 2 and 3 (both RCA) can be used for audio input. For connection, select [AUDIO 2] or [AUDIO 3] from the AUDIO INPUT button.
Connections
–continued