Maytag MD7500 - Manual (Page 7)

6
Select “Sensor Dry”. The next screen will be the
Review Screen. If the selections are correct, press
Start/Pause. If changes need to be made, follow the
next steps. Select dryness level. The dryness
level ranges from very dry to
damp dry. Select the level appro-
priate for the load.
The
“Normal Dry” level will be
used for most loads.
Select appropriate tempera-
ture; “Regular”, “Medium”,
“Delicate” or “Extra Low”.
Review Screen – The Review Screen lists the selected settings. At this
point you may press Start/Pause to begin drying the load or select
“Options” for further customization of the drying cycle. Selecting Options. The following options are
available:
• “Wrinkle Prevent” - Intermittent tumble in
room temperature air for up to two hours fol-
lowing the dry cycle.
• “Damp Dry Chime” - Chimes when load is
damp.
• “Remind Chime” - Chimes at the end of the
cycle every 5 minutes for up to two hours.
• “End of Cycle Chime” - Chimes once when
the selected dryness level is reached.
Review Screen – The review screen will show once again
to verify your selections.
If they are correct, press
Start/Pause. If they are incorrect, press the area you
would like to change.
S
ETTING YOUR
D
RYER
C
ONTROLS
If there are no words on the touchscreen, open the door, touch any pad (except off), or touch the screen to “wake” the
controls.
ONTROLS AT A
G
LANCE
C
Step 1 Step 1 Step 2 Step 2 Step 3 Step 3
Step 4 Step 4 Step 5 Step 5
Step 6 Step 6
sensor dry
Home
time dry
more cycles
air fluff
(no heat)
favorite
cycles
dryness level
normaldry
Press Start
or change your selections below.
regular
temperature
options
cycle chime loud
remind chime ON very dry more dry
normal dry
less dry damp dry
Dryness Level
dryness level
normal dry
Press Start
or change your selections below.
medium
temperature
options
cycle chime loud
remind chime ON
regular medium
delicate extra low
Temperature
dryness level
normal dry
Press START or
change your selection below.
regular
temperature
options
cycle chime loud
remind chime ON
loud end
of cycle chime
Options
continue
wrinkle prevent
on off
remind chime
on off
damp dry chime
on off
dryness level
normal dry
Press START or
change your selection below.
regular
temperature
options
cycle chime loud
remind chime ON
S
ENSOR
D
RY
Sensor dry is the fastest and most energy efficient drying method.
Special Note: As you use the touch-
screen, if you feel you are lost, press Back
or Home.
dryness level
normal dry
Press START or
change your selection below.
regular
temperature
options
cycle chime loud
remind chime ON