Memorex iFlipTM - Manual (Page 9)

8
OPERATION
With an iPod connected (see
previous page), turn the Mi8000 on
by pressing and holding the Power
button (if it is not on already); the
Power On indicator will light green.
1
1
Operate the iPod as per its
owner’s manual.
For music selections, the sound
will be heard through the Mi8000’s
speakers.
For photo selections, the image
will be seen on the Mi8000’s
screen.
For video selections, the sound
will be heard through the Mi8000’s
speakers and the image will be
seen on the Mi8000’s screen.
2
Adjust the volume as desired by
pressing the - / + (Volume/Setting)
button.
For private listening, plug in
headphones into the Headphones
jack(s) on the side of the Mi8000.
The speakers will be disconnected
when headphones are plugged in.
1 1
3
When done, press and hold the
Power button (the Power On
indicator will go out) and also turn
off the iPod.
1 1
4
USING AN iPod WITH THIS UNIT
NOTES:
• Make sure to go into the Settings menu of your iPod and set the TV
Out setting to ON and set the TV Signal to NTSC; otherwise, you may
not be able to view the videos/ photos on your external TV.
• The photo and video selections are for iPod with video (5th
generation). The photo selection is also suitable for iPod photo.